Free shipping for orders over €90.00.
Solution of natural oils for the nourishment and protection of parquet with oil finish. For periodic use.
Instructions for Use:
Remove the dust on the surface of the floor by sweeping with a broom or, even better, by vacuuming with a brush suitable for cleaning oiled parquet.
To make the application of Oleovivo® more effective, first wash the parquet with Extraclean. Shake the package well.
Spill Oleovivo® Listone Giordano pure on the floor, in small quantities at a time, and spread it out with a cotton cloth, rubbing as in a typical action for cleaning a surface and always in the direction of the wood grain (the operation can be performed by hand or with the aid of a brush). The appearance, once the product has been applied, must be that of a slightly wet surface. Wait a few minutes (in any case never more than 10-15 minutes).
Polish the floor surface with a domestic polishing machine with felt pads or other soft material (no brushes). In the absence of this, surface homogenization can also be carried out by hand, with a soft cotton cloth pulled with a brush.
At the end of the treatment, the floor can also be walked on immediately.
To obtain a better result it is always advisable to wait a few hours.
The use of any other product other than oleovivo® is not recommended.
Important: Immediately after completing the operations, rinse thoroughly or immerse the rags and pads used for applying the product in water. If left in a place with poor ventilation, they could cause self-ignition.
A 1 liter can of product is normally sufficient for the intervention on approximately 80-100 m² of surface. In consideration of the possible waste, it is recommended, however, to make a supply of 1 liter every 60 m² of surface
Read the label before using the product.